Samur Wireless LED Module

Ivmech

$22.06
Including Tax: $0.10
Cheapest shipping from $5.10
Stock Status: In Stock
Delivery Status: International
pcs

2.4 GHz Remotely Controlled LED Switch for Home Automation and IoT is designed to operate in a wall switch box or in locations where the control of LED strips is needed. It is also possible to send a signal to any system that is to be integrated.

  • Small (40mm x 35mm) easy to fit into typical 60mm diameter electric in-wall box
  • Have meshed wireless network topology on 2.4GHz
  • Provides On / Off control for LED strips
  • Can supply up to 6.5 meters 12V LED strip or 13 meters 24V LED strip
  • Can be controlled by external signal input
  • Can work without Gateway (Especially when gateway down, no power or no radio connection)
  • Designed based on transceiver NRF24L01+ and microcontroller Atmega328p
  • MySensors compatible
  • Best suitable for Home Automation, IoT
  • Unique ID is assigned automatically by learning mode
  • 6 pin standard Atmel ISP (pogo pin style programming)
  • 7 pole screw terminal for AC connection
  • Controlled by any NRF24L01+ gateway system devices or controllers
Power supply: 12V DC or 24V DC
Power consumption: 0.3 W
Operational temperature: 0 - 35°C
Dimensions (L x W x H): 40 x 35 x 20 mm
For installation in boxes: Ø ≥ 50mm
Rated load current: 10 Amps
12V LED strip current: 1.5 Amps per meter (0.50 Amps per foot)
24V LED strip current: 0.75 Amps per meter (0.25 Amps per foot)
Overcurrent protection: required external 10 Amps DC Fuse
Active element: No
Device control: remotely - radio waves, directly - push buttons
MCU model: Atmega328p
Radio protocol: NRF24L01+
Radio signal power:
Radio Frequency: 2.4 GHz
Range: 20-60m indoors (depending on building materials)